All amateur frequencies from 1.8-29.7 MHz

1500 Watts minimum on all served bands

<-30 dBc

3:1

45 ? 60 Watts nominal for full power out

single 3CX1500/8877 type high performance power triode with a plate dissipation of 1500 watts provides key down performance on all frequency bands, all modes, and all duty cycles.

Enter your iconbox content here.

Comes standard with 4 x SO-239 BIRD connectors, but can be changed to Type N easily from the back panel by removing 4 screws.

Internal 4 port antenna switch with 1 or 2 outputs per band/segment

The Bruene type wattmeter accurately simultaneously measures both forward and reverse power and displays this information on the easy to read bar graph meters on the front panel. It also uses the information to simultaneously monitor the gain of the amplifier.

HV Interlock and Power Interlock.

There are two power ?ON? buttons on the Alpha 9500. ?ON1? activates the Wattmeter and antenna selector without powering the amplifier itself, and sets the amplifier into ?bypass? mode. The Amplifier is powered with the ?ON2? button.

Comes standard with an SO-239 BIRD connector, but can be changed to BIRD N Type easily from the back panel ? order JCX-X130

Automatic plus manual override

100,120,200,220,240 VAC, 50/60 Hz, selection Automatic. At 240 VAC requires 20 Amps. Note ? Although the amplifier will operate at 100V, the mains will have to be able to deliver upwards of 35 amps.

Serial port and USB. Full remote control capability.

Protected against all common faults.

Bar graphs display Power, SWR, Grid Current, Plate Current, Plate Voltage, and Gain ? all simultaneously. Digital Panel Meter can display Forward Power, Plate Current, Plate Voltage, Grid Current, SWR, Filament Voltage, and PEP Output.

Two Gigavac brand vacuum relays enabling QSK (full break-in) at QRO (full power). KEY IN jack 12 vdc / 12 ma.

1500 Watts.

95 lb, Assembled weight 82 lb

17.5"w x 7.5"h x 19.75"d

We ship the amplifier in a double box, and the transformer in a separate box.