All amateur frequencies from 1.8 ? 29.7 MHz

1500 Watts minimum on all served bands

<-30 dBc SWR tolerance 3:1

50 to 55 Watts nominal for full power out

Two 4CX1500B high performance power tetrodes with a combined plate dissipation of 3000 watts provides key down performance on all frequency bands, all modes, and all duty cycles

Enter your iconbox content here.

Comes with a standard SO 239 connector, but we can install N Type connectors if you specify at time of order.

Comes with a standard SO 239 connector, but we can install N Type connectors if you specify at time of order

The Bruene type wattmeter accurately simultaneously measures both forward and reverse power and displays this information on the easy to read bar graph meters on the front panel. It also uses the information to simultaneously monitor the gain of the amplifier.

HV Interlock and Power Interlock

Band switching Manual

100,120,200,220,240 VAC, 50 60 Hz, manual selection. At 240 VAC requires 20 Amps. Note ? Although the amplifier will operate at 100VAC, the Mains will have to be able to deliver upwards of 35 amps.

USB. Remote control capability.

Protected against all common faults Reflected Power, excess Plate Current, Low Gain

Bar graphs display RF Output Power, Reflected Power, and Plate Current, Plate Voltage, or Gain all simultaneously.

Two high speed relays enabling QSK (full break-in) at QRO (full power). KEY IN jack 12 vdc / 10 ma.

500 Watts

Enter your iconbox content here.

17.5" w x 7.5" h x 19.75" d

We ship the amplifier in a double box, and the transformer in a separate box.